Macquarie Semiconductor and Technology on behalf of Micron Memory Taiwan Co., Ltd. (MTB)
The images and data contained herein is owned by Macquarie and is intended for use only by potential purchasers of goods shown herein. Except for such permitted usage, no other use of the images and data is permitted and such images and data shall not be exhibited or shown in any websites or social media or for any commercial purposes without Macquarie’s written permission. Therefore, no seller of goods like the goods shown herein has any right or authority to show or exhibit any images or data shown herein.
Date of Manufacture:
Currently Configured for: N/A
Current Equipment Status: Available
Asset HDD not included
Location of Equipment: Taichung City, Taiwan
Available date: Currently Available
Nordson MH900 loader/unloader, QTY2
The scalable Spectrum II series is ideal for highvolume production of advanced dispensing processes, including underfill, cavity fill, die attach, and encapsulation.
Features and Configurations
Additional Optional Features and Configurations
CpH™ - Controlled Process Substrate Heat
Dual-action dispensing (two applicators operate independently)
Exterior bulk fluid reservoir: 600 cc (20 oz), includes remote feed and fluid level sensor
Hot plate, process development (batch processing)
Low fluid sensor, magnetic or capacitive
Cleanroom compatibility
Monocle™ Vision Package (MVP) for increased contrast, field of view, and vision resolution
SECS/GEM interface
Ventilation Interlocking for Volatile Organic Compound dispensing (e.g. flux or primer)
Key System Specifications
Motion System
Z repeatability (1): ±15 µm (0.0006 in.), 3 sigma
X-Y repeatability (1): ±15 µm (0.0006 in.), 3 sigma
X-Y acceleration: 1 g peak
X-Y velocity: 1 m/s peak (40 in./s)
X-Y-Z encoder resolution: 1 µm
Wet Dispensing Accuracy & Repeatability
Single Applicator:
Cp ≥ 1.0: ±35 µm (0.0016 in.)
Cpk ≥ 1.0(1): ±40 µm (0.0016 in.)
Z-Gap Performance
Z-Gap Repeatability (2): ±15 µm (0.0006 in.), 3 sigma
Minimum Z-Gap Capability: 50 µm (0.002 in.)
Dispense Area (X-Y) 339 x 410 mm (13.3 x 16.1 in.)
Conveyor
Min. board/carrier width (3): 34 mm (1.3 in.)
Max. board/carrier thickness: 12 mm (0.5 in.)
Max. board/carrier length: One station: 340 mm (13.4 in.) Three stations: 320 mm (12.6 in.)
Min. board/carrier length: 25 mm (1.0 in.)
Max. board/carrier width: Single lane: 535 mm (21.1 in.) Dual lane: up to 228 mm (9.0 in.) (configuration dependent)
System footprint: Single heat station: 600 mm wide x 1321 mm deep (23.6 x 52.0 in.) Two heat stations: 850 x 1321 mm (33.5x52.0 in.) Three heat stations: 1100 x 1321 mm (43.3x52.0 in.)
Air supply: Two air supplies: one with 3 CFM @ 100 psi for contact tooling, a second one with 1 CFM @ 100 psi for the rest of the system (100 psi = 689 kPa, 6.8 atm) Power (mains):
Power supply accommodates 200-240 VAC, 47-63 Hz single phase, 30 A
System weight (4): 377-422 kg (830-930 lbs.)
(1) Wet dispense Cpk is tested against Nordson ASYMTEK standard sealant line path accuracy test method
(2) Z-gap repeatability is tested with Nordson ASYMTEK standardwhite ceramic, performance with other substrates may vary
(3) Contact factory regarding smaller boards/carriers
(4) System weight varies depending on configuration
The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.
Get in touch
Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.