Macquarie Semiconductor and Technology on behalf of Micron Memory Taiwan Co., Ltd. (MTB)

Nordson Asymtek S920N

Asset ID: 209951

Print spec sheet

Nordson Asymtek

S920N

Adhesive Dispenser

Fluid Dispensing

Equipment details:

Date of Manufacture:

Currently Configured for: N/A

Current Equipment Status: Available

Asset HDD not included

Location of Equipment: Taichung City, Taiwan

Available date: Currently Available



The scalable Spectrum II series is ideal for highvolume production of advanced dispensing processes, including underfill, cavity fill, die attach, and encapsulation.

Features and Configurations

Additional Optional Features and Configurations

CpH™ - Controlled Process Substrate Heat

Dual-action dispensing (two applicators operate independently)

Exterior bulk fluid reservoir: 600 cc (20 oz), includes remote feed and fluid level sensor

Hot plate, process development (batch processing)

Low fluid sensor, magnetic or capacitive

Cleanroom compatibility

Monocle™ Vision Package (MVP) for increased contrast, field of view, and vision resolution

SECS/GEM interface

Ventilation Interlocking for Volatile Organic Compound dispensing (e.g. flux or primer)


Key System Specifications

Motion System

Z repeatability (1): ±15 µm (0.0006 in.), 3 sigma

X-Y repeatability (1): ±15 µm (0.0006 in.), 3 sigma

X-Y acceleration: 1 g peak

X-Y velocity: 1 m/s peak (40 in./s)

X-Y-Z encoder resolution: 1 µm

Wet Dispensing Accuracy & Repeatability

Single Applicator:

Cp ≥ 1.0: ±35 µm (0.0016 in.)

Cpk ≥ 1.0(1): ±40 µm (0.0016 in.)

Z-Gap Performance

Z-Gap Repeatability (2): ±15 µm (0.0006 in.), 3 sigma

Minimum Z-Gap Capability: 50 µm (0.002 in.)

Dispense Area (X-Y) 339 x 410 mm (13.3 x 16.1 in.)

Conveyor

Min. board/carrier width (3): 34 mm (1.3 in.)

Max. board/carrier thickness: 12 mm (0.5 in.)

Max. board/carrier length: One station: 340 mm (13.4 in.) Three stations: 320 mm (12.6 in.)

Min. board/carrier length: 25 mm (1.0 in.)

Max. board/carrier width: Single lane: 535 mm (21.1 in.) Dual lane: up to 228 mm (9.0 in.) (configuration dependent)

System footprint: Single heat station: 600 mm wide x 1321 mm deep (23.6 x 52.0 in.) Two heat stations: 850 x 1321 mm (33.5x52.0 in.) Three heat stations: 1100 x 1321 mm (43.3x52.0 in.)

Air supply: Two air supplies: one with 3 CFM @ 100 psi for contact tooling, a second one with 1 CFM @ 100 psi for the rest of the system (100 psi = 689 kPa, 6.8 atm) Power (mains):

Power supply accommodates 200-240 VAC, 47-63 Hz single phase, 30 A

System weight (4): 377-422 kg (830-930 lbs.)


(1) Wet dispense Cpk is tested against Nordson ASYMTEK standard sealant line path accuracy test method

(2) Z-gap repeatability is tested with Nordson ASYMTEK standardwhite ceramic, performance with other substrates may vary

(3) Contact factory regarding smaller boards/carriers

(4) System weight varies depending on configuration

Enquire about this product

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.

The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.


Related products

No results message:
Displayed when filters returns no results.

We couldn't find any items that match your criteria.

Please try a different keyword.

Service unavailable:
Displayed when filter service cannot be reached.

Sorry, this service is currently unavailable.

Please try again later.

Get in touch

Have a question for our team?

Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.