Macquarie Semiconductor and Technology on behalf of Macquarie (Asia) Pte Ltd. Taiwan Branch - UMC
SR560 — Low-noise voltage preamplifier
Date of Manufacture:
Currently Configured for: N/A
Current Equipment Status: Available
Asset HDD not included
Location of Equipment: Hsinchu, Taiwan
Available date: Currently Available
| Model : SR560 |
| Input |
| Inputs AC or DC coupled, single-ended or differential |
| Input impedance 100 MΩ; + 25 pF |
| Maximum input 3 Vpp |
| CMRR 100 dB from DC to 1 kHz (100 mVrms common mode input at 1kHz , gain=100, low noise mode. Decreases by 6 dB/octave from 1 kHz to 1 MHz) |
| Gain 1 to 50,000 in 1-2-5 sequence. Vernier gain in 0.5 % steps. |
| Gain stability 200 ppm/℃ |
| Bandwidth -3 dB at 1.2 MHz (typ.) |
| Filters |
| Signal filters 2 configurable (low-pass or high-pass) 6 dB/oct rolloff filters. -3 dB points are settable in a 1-3-10 sequence from 0.03 Hz to 1 MHz. |
| Gain allocation High Dynamic Reserve — Gain is increased after the signal filters to prevent overloading. |
| Low Noise - Gain is increased before the filters to improve noise figure. |
| Output |
| Maximum output 10 Vpp into 50 Ω and 600 Ω |
| Filter reset Long time constant filters may be reset with front-panel button. |
| DC drift 5 µV/°C referred to input (DC coupled) |
| Distortion 0.01 % at 1 kHz |
The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.
Get in touch
Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.
