Macquarie Semiconductor and Technology on behalf of Micron Technology Taiwan, Inc. (F11)

Tokyo Electron Ltd. (TEL) Telius SP-305 SCCM

Asset ID: 12662

Print spec sheet

Tokyo Electron Ltd. (TEL)

Telius SP-305 SCCM

Dielectric Etch

Etch/Ash/Clean - Plasma Processing

Equipment details:

Date of Manufacture: 2007

Currently Configured for: 300mm

Current Equipment Status: Incoming

Asset HDD not included

Location of Equipment: Taoyuan, Taiwan

Available date: 8/26/2022

Process: OX

Standard Specifications
Software Revision: Linux 5.75 Rev 001
Lot Stability Dummy SW: Software for running lot stability wafer.
OEE WPH Software: Yes
GEM SEC Revision: TBD
Wafer Size: Diameter 300+/- 0.20mm(SEMI M1.15), Notch
Carrier: FOUP (Comply with SEMI E47.1 (25wafers))
Inter Face: 5 carrier stage (Continuous flow operation) with Semi compliant MENV and FIMS assemblies
Online Connection: GEM / CIM GJG (Hardware Interface : Ethernet 100Base-Tx)
Interface A: Yes
Utility Box: Regulator : Air/AR2500(SMC), N2/SQ-420E(VERIFLO), He/SQMICRO(VERIFLO)
Utility Box: Manual Valve : OGD20V-6RM-K / OGD10V-4RM-K (CKD)
Utility Box: Pressure Gauge : Bourdon Gauge
Loader Mod Corrosion Prevent: NO, without Corrosion Prevent
Load Lock Pressure Monitor: Pressure Switch : VSA100A (INFICON)
Load Lock Pressure Monitor: Pirani gauge : TTR211S LEYBOLD)
Load Lock Pressure Monitor: CM : 626A01TDE (MKS)
Maintenance Monitor: 2 (Flat Panel Display Touch Screen Type)
Water Leak Detector: 5 (LM;1, each PS;1)
Signal Tower: Red/Yellow/Green/Blue (Upper Left of Front x1 & Upper right section of loader on maintenance side x1)
Data Back up: USB& MO
EMO: Front x3, Rear x6
Cable Length: One 15m and one 16m (Interconnection, RF cables)
Inter Locks: External (When the I/L signal is received from Factory, gas valves are closed)
Fittings: No brass fittings

Supporting Remote Units
Chiller: UBRPD5A-2T?
Coolant: Lower:FC3283, Upper:FC40
Chiller Hose: BRINE HOSE 15/14M
Handy Maintenance Controller: LCD DISPLAY UT3-TLN21-A
RF Generator TOP: AGA-50B2
RF Matcher TOP: AMN-50B2
RF Generator Bottom: WGA-50E
Matching Controller: WMN-50H6(2MHZ/5KW)(PS3)
Pen Record Box: 2L80-00212-12
Loader Module: SELME2112ZS22-AD5
LOAD PORT: NO,Bolts-L type
Carrier ID Reader: NO,V640series+V700-L22 (Omron)
APC: 12 INCH (320MM)

Hardware Configuration
Proc Chbr 1,2,3,4: SCCM Oxide; Y203 Coating
Chamber hardware: FCC
Endpoint type: SE2000ii
ESC type: Ceramics ESCwith STD Vpp
Focus ring: 3.4mm
Thunderwall He Gas Inlet: Ceramic Thunderwall with Ceramic pusher pins
Polished focus ring: O
FC lower insulator: FC lower insulator w/quartz upper ring shield
Magnet Shield: O
Oring for Chbr Body-Depos: Armorcrystal, Chemraz SC657
CEL Body ASSY: Brine Control Mode
TMP Back Pressure Monitor: 51A11TGA2BA003 (MKS)
Dry Pump: ESR80WN, KEG approved
Final Valve, Heater: Valve; AGD21V-6RM-GWL4 (CKD)
Filter: Filter; CEP-TM_HL-VR-03PB (Toshiba Ceramic)
APC: Pendulum Motion Dia., 320mm(VAT), R.T.~90deg
Pressure Monitor: C/M (Process Monitor) : 627BRETDD2P (MKS), 45deg, 30Pa
Pressure Monitor: C/M (Self Check) : 627B11TDC2P (MKS), 45deg, 1330Pa
Pressure Monitor: B.A. Gauge (CM Calibration) : BPG400 (INFICON), 2.0x10-5 ~ 0.1Pa
Pressure Monitor: N,41A13DGA2AA040 (MKS), no process impact
Pressure Monitor: Pressure Switch : 51A11TGA2BA010 (MKS), H2/fluoro gas

Gas Box Configuration
Gas line 1- N2 1000 sccm-AERA FCD985CT-BF
Gas line 2- C4F8 200 sccm-AERA FC-D985CT-BF
Gas line 3- Ar 2000 sccm-AERA FC-D985CT-BF
Gas line 4- O2 50 sccm-AERA FC-D985CT-BF
Gas line 5- CH2F2 30 sccm-AERA FC-D985CT-BF
Gas line 6- CHF3 200 sccm-AERA FC-D985CT-BF
Gas line 7- CF4 200 sccm-AERA FC-D985CT-BF
Gas line 8- C4F8 50 sccms-AERA FC-D985CT-BF
Gas line 9- C3F8 50 sccms-AERA FC-D985CT-BF
Gas line 10- C4F6 50 sccm-AERA FC-D985CT-BF
Gas line 11- O2 1000 sccm-AERA FC-D985CT-BF
Gas line 12- Ar 500 sccm-AERA FC-D985CT-BF
Purge: N2 (Process Grade N2)
Filter: CNF1004USG4 (Nihon Pall)
Filter (N2): CNF1004USG4 (Nihon Pall)
Valve: Primary side(Utility-MFC):Mega mini (FUJIKIN)
Valve: Secondary side(MFC-PC):Mega one (FUJIKIN)
Piping: Dual Piping (for Gas leak containment, Gas box to Final valve & Exhaust through Gas box)
Gas Leak Detection Port: 5 Ports (6.35mm, Swagelok L-type)
Final Pressure Switch: 51A (MKS)
Pressure Gauge: Bourdon

Enquire about this product

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.

The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.

Related products

No results message:
Displayed when filters returns no results.

We couldn't find any items that match your criteria.

Please try a different keyword.

Service unavailable:
Displayed when filter service cannot be reached.

Sorry, this service is currently unavailable.

Please try again later.

Get in touch

Have a question for our team?

Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.