Macquarie Semiconductor and Technology on behalf of Micron Technology Taiwan, Inc. (F11)

LAM Research 2300 Exelan Flex

Asset ID: 10791

Print spec sheet

LAM Research

2300 Exelan Flex

Dielectric Etch

Etch/Ash/Clean - Plasma Processing

Equipment details:

Date of Manufacture: 2006

Currently Configured for: 300mm

Current Equipment Status: Available

Asset HDD not included

Location of Equipment: Taoyuan, Taiwan

Available date: Currently Available

Process: OX


Tool config is based on original PO, please verify tool details at tool inspection


FI SN: 101543506310528

Chamber SN: 23EX1593(F97589-PM1), 23EXF1594(F97589-PM2), 23EXF1595(F97589-PM3), 23EXF1751(F106896-PM1),




Standard Specs

Software Revision: 1.7.2 SP2 HF4 CST2

Factory Automation: OHT PIO Sensor

AMHS: AMHS - OHT or manual deliver - Factory Interface

Wafer Size: Diameter 300+/- 0.05mm(SEMI M28), 775 +/- 25um, Notch

Carrier: FOUP (Comply with SEMI E47.1 (25wafers))

Inter Face: 3 carrier stage (Continuous flow operation)

Online Connection: GEM / CIM JGJ (Hardware Interface : Ethernet 100Base-Tx)

Interface A: Hardware related to EDA Note: This is a cost option.

Small Wip Buffer FIX THIS: 4 Station Small Wip Buffer. With Semi compliant MENV and FIMS assemblies

Utility Box: Regulator : Air/AR2500(SMC), N2/SQ-420E(VERUFLO), He/SQMICRO(VERIFLO)

Utility Box: Manual Valve : OGD20V-6RM-K / OGD10V-4RM-K (CKD)

Utility Box: Pressure Gauge : Bourdon Gauge

Platform Type: Version 2

UPS on system: Yes

Earth Leakage Breaker: Yes (for Fab 3 only)

Gas Box: Transport Module, GIB for 16 lines IGS GBX

Monitor: 2 (Flat Panel Display Touch Screen Type, 1; Fromt, 1; Side)

Signal Tower: Red/Orange/Green/Blue (Upper Left of Front x1 & Upper right section of loader on maintenance 


side x1)

EMO: Front x2, Rear x6

Conditioning Station: No

Foreline: Not Heated

Sub-panel: Dual Drop Sub-panel

Interconnect Cables: TM to sub-panel, 50 ft

Pump to TCU: 50 ft

TCU to PM: 50 ft

PM to Pump Interconnect: 50 ft

Inter Lock: Gas Box Door (I/L Signal is sent to the Factory)

Inter Lock: External (When the I/L signal is received from Factory, gas valves are closed)


Support Remote Units

Chiller Lower: ATS DEX 20A

Coolant: FC3283

Chiller Hose: 5/8 ID Braided Stainless Flex

RF Generator 2 MHz: Including RF Cable Tru-8743-07 ( 7 ft cable )

RF Generator 27 MHz: Including RF Cable Tru-8743-07 ( 7 ft cable )

RF Matcher, 2-27 MHz, DFC: RF Matcher, 2-27 MHz, DFC

Wafer ID Reader: WIDS Bottom Read

Carrier ID Reader: Asyst RF Advantag

EIM Server: EIM Server-One EIM server per 8 frames



Hardware Config

Process Chb.1,2,3,&4: 2300 Exelan Flex 45 Ready (Without Captive Cam Ring)

25 Wafer Input Buffer Station: KIT,JIT<OPT<25 STATION BUFFER,300MM

Endpoint type: Optical Emission Spectroscopy

ESC type: Dual Zone/Flex Bipolar

Focus ring: Hot Edge, Si

High-conductance Wap Ring: 4 Ring

Gap: 2.34 cm

TMP: ALCATEL ATH,1600M

Dry Pump: IH600 (EDWARDS) ; Customer Supply

Transfer Module Backing Pump: EPX with N2 Gas Module

Pressure Monitor: C/M ( Process Monitor ) 628B01TDE1B (MKS ) 1 Torr

Pressure Monitor: C/M ( Service Monitor ) 625A-14059 10 Torr

Pressure Monitor: C/M ( Foreline Monitor ) 625A-14059 10 Torr

Pressure Monitor: Absolute Pressure switch 75 Torr Lam P/N 768-093959-001

Pressure Monitor: Differential Pressure switch Activation 7mm Hg Vac Precision Sensors P/N D48W-14

Upper Electrode: Heated Constant Temperature Control

Coolant Temp Monitor Kit: Coolant Temp Monitoring Kit for Top Plate & Lower Electrode

O-Rings: FluoroSilicone

Chamber Isolation Valve: Barrier Seal Door

Wafer Lift Mechanism: Direct Drive


Gas Position

Gas line 1-C4F8 50 sccm- AERA FC-D780CU

Gas line 2-O2 50 sccm- AERA FC-D780CU

Gas line 3-CHF3 100 sccm-AERA FC-D780CU

Gas line 4-CF4 200 sccm-AERA FC-D780CU

Gas line 5-30% O2/HE 100 sccm-AERA FC-D780CU

Gas line 6-C4F6 50 sccm- AERA FC-D780CU

Gas line 7-CH2F2 50 sccm-AERA FC-D780CU

Gas line 8-CF4 1000 sccm- AERA FC-D780CU

Gas line 9-H2 1500 sccm- AERA FC-D780CU

Gas line 10-AR 1000 sccm- AERA FC-D780CU

Gas line 11-N2 1000 sccm- AERA FC-D780CU

Gas line 12-O2 3000 sccm- AERA FC-D780CU

Tuning Gas: 30% O2/HE 50 sccm-AERA FC-D780CU


Gas Box Config

Purge: N2 (Process Grade N2) (Customer Supplied)

Filter: Final gas : Mykrolis (P/N WG2FT1RR2)

Gas Box Inlet Option: Regulated Inlet Gas Panel

Non-standard PM/GB Feature: Enhanced gas box with 12 gas lines.

Gas Line Pressure Transducer: Actual pressure transducer WITHOUT digital readout

Regulator: SQMICRO (VERIFLO)

Piping: Single Contained Hasteloy Piping (Gas box to Final valve & Exhaust through Gas box)

Final Pressure Switch: Absolute Pre


Damage/Missing parts list

Please inspect tool to reconfirm

Dry pumps and customer provided items not included on sales

Enquire about this product

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.

Product Images

The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.


Related products

No results message:
Displayed when filters returns no results.

We couldn't find any items that match your criteria.

Please try a different keyword.

Service unavailable:
Displayed when filter service cannot be reached.

Sorry, this service is currently unavailable.

Please try again later.

Get in touch

Have a question for our team?

Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.