Macquarie Semiconductor and Technology on behalf of Micron Memory Japan, G.K. (F15)
Date of Manufacture: November, 2006
Currently Configured for: 300mm
Current Equipment Status: Incoming
Asset HDD not included
Location of Equipment: Hiroshima, Japan
Available date: Currently Available
CHEMLAB EF01K2A300 TSK UF300 Prober
Tool has been de-installed and is stored in an off-site warehouse.
A Hard Disk Drive to be removed from tool.
No pictures provided. Please inspect to collect photos.
Other Missing or damaged parts: Not reported.
CONFIGURATIONS CHECK LIST AVAILABLE: PLEASE ASK YOUR SALES PERSON.
[Prober : main/loader]
UF3000
Vendor Tool Serial #F24002LA
Air: over 0.6M Pa
Vacuum: over -80 K Pa
Voltage: 200V AC Single Phase
Frequency: 50/60 Hz
Wirning: 2WIRE + Ground
Full Load: AMPS 7.5A
MAIN BREAKER RATING: 10A
AMPERE RATING LARGEST MOTOR LOAD: 1.1A
INTERRUPT CURRENT: 14 KA A.I.C
MFG DATE: Nov-06
Hot & Cold chuck:Yes
Temp. Range : -40℃ ~ +150℃
Accuracy: ±1℃
[Chiller]
SCU-600E Chiller included in tool.
Vendor Tool Serial #5DE06037A
Air: over 0.6M Pa
Input Volts: AC200C
Frequency: 50/60 Hz
Weight: 420Kg
Write Configuration: 2WIRE + GROUND
FLA: 36A
MAIN BREAKER RATING: 40A
INTERRUPT CURRENT: 14 KA A.I.C
MFG Date: 05/2006
[a HF is a Manipulator or a Hinge Manipulator made by Accretech.]
MHF9000 Hinge included in tool.
Vendor Tool Serial #F01502LA
* Used to be Connected to Prober when An Advantest T5383 tester was connected with the Prober. The
A MHF9000 Hinge was not connected with tool when a Micron C1D Engineering Station was connected with tool.
2006/Nov to 2016/Feb : An Advantest T5383 tester was connected tool.
2016/March to 2020/May: A Micron C1D Engineering Station was connected with tool.
June 2020 to Sep 2020: The tool was relocated from the productions line to a Lab room in Fab15.
The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.
Get in touch
Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.