Macquarie Semiconductor and Technology on behalf of Micron Memory Taiwan Co., Ltd. (F16)

Accretech/TSK UF3000

Disclaimer

The images and data contained herein is owned by Macquarie and is intended for use only by potential purchasers of goods shown herein. Except for such permitted usage, no other use of the images and data is permitted and such images and data shall not be exhibited or shown in any websites or social media or for any commercial purposes without Macquarie’s written permission. Therefore, no seller of goods like the goods shown herein has any right or authority to show or exhibit any images or data shown herein.


Asset ID: 207209

Enquire about this product Print spec sheet

Accretech/TSK

UF3000

Production Wafer Prober

Wafer Prober

Equipment details:

Date of Manufacture: 2006-01-01

Currently Configured for: 300mm

Current Equipment Status: Available

Asset HDD not included

Location of Equipment: Taichung City, Taiwan

Available date: Currently Available

PROBE TCP-3ACCR_16PINC1D TSK UF3000 Final Probe


Other Missing or damaged parts: Not reported. Please inspect to confirm.


Loader Type: TSK

Number of Loaders: 1 Single loadport

Cassette ID Reader: Yes, KEYENCE BL-601HAC1

Chuck Size: 12"

Chuck Top Material: NICKEL COATING

Low Temp Chuck: YES, Type: ARTS-LC12

Chuck Temperature Range: -40~150℃

Temperature Unified Chuck Option: Yes

Low Noise Chuck Option: No

External Chiller Unit: Yes, SHI SCU500S

High Force Z Drive: No

Auto Probe to Pad Alignment: Yes

Needle Mark Inspection: Yes

Fail Mark Inspection: Yes

Surface Wafer ID OCR: Yes, INSIGHT 1700 series

Wafer ID Barcode Reader: No

Needle Cleaning Option (Double Brush): No

Auto Needle Height and Align: Yes, Auto/Manual card change

Soak Time Option: Yes

Probe Card Changer: Yes

3-64 Multi-site Probing: 1~1024

GPIB Interface: Yes, ACCRETECH STANDARD COMMAND

RS232 Interface: Yes

RF Tag: No

Software Version: S8.39.CM

P/C unit no.: ACCT-072

User ID / Password: Default

Integrated Printer: No

Manipulator: Hinge, MHF6000

Test System Interface: Micron C1D (tester is not included)


Tool is a Cold temperature range prober.

X,Y Overall Accuracy:±2.0µm (Temp Stability ±1℃

X,Y Stage Accuracy:±1.0µm

Z Axis Stroke(Applicable stroke):37mm

Z Axis Control Accuracy:±2µm

Stage Durability:200kgf

Hot&COLD chuck

Chiller:SCU-600

Temp. Range:-40 to 150℃


Tool is a right SIDE LOADER.


Audit to verify


============= OEM Feature as below for reference ================

Overall Accuracy Within 2 µm

X,Y Stage Accuracy:±1.0µm

Stage Durability:200kgf

Wafer Size 8", 12"

X/Y axis Probing Area ±170 mm (X/Y axis Probing Area)

X/Y axis Maximum Speed X axis 300 mm/s Y axis 230 mm/s

Z axis Full Stroke 37 mm

Z axis Maximum Speed 30 mm/s

θ axis Rotation Range ±5 deg.

Fine Alignment CCD ITV Image Processing

Loader Cassette Mounts 1 (2nd cassette with option)

Loader Wafer Handling Robot Arm / Backside Holding

Hard Disk 3.5" 20GB (1 unit standard)

Floppy Disk 3.5" 2HD / 2DD (1 unit standard)

MO 230 / 540MB (1 unit standard)

Display 12.1" TFT Color LCD

Power Consumption Less than 2kVA

Air Supply Source Pressure 0.6 MPa or more

Air Supply Consumption Approximately 0.1 liters / wafer

Vacuum Supply Less than -80 kPa, 30 liters / minute

Dimensions 1508W × 1587D × 987 H mm

Weight 1500 kg (Standard)

Product images

The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.


Learn more -

Enquire about this product

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.

Related products

No results message:
Displayed when filters returns no results.

We couldn't find any items that match your criteria.

Please try a different keyword.

Service unavailable:
Displayed when filter service cannot be reached.

Sorry, this service is currently unavailable.

Please try again later.

Get in touch

Have a question for our team?

Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.

I agree to receive further communication from Macquarie Group Limited in accordance with its Privacy Policy, as amended from time to time.