Macquarie Semiconductor and Technology on behalf of Qorvo US, Inc.
Date of Manufacture:
Currently Configured for: N/A
Current Equipment Status: Available
Location of Equipment: Farmers Branch, United States
Available date: Currently Available
Hybond, Inc. 572A
Verify to audit
MODEL 572A Thermosonic Wedge Bonder
Imitated but never duplicated, Hybond's exclusive Soft Touch™ force ramping system bonds effectively with less trauma to sensitive materials like GaAs and InP.
Superior wire control is provided by the motorized feed system which features clamps capable of feeding wire and ribbon, dial adjustable tail length, switch for manual tail length adjustment and clamp pull back dial adjustment to allow bonding and cutting of softer (higher elongation) wires than conventionally used for wedge bonding.
Model 572A includes front panel independent controls for 1st and 2nd bond U/S, Time & Force as well as for the built in workstage temperature controller.
The 572A has a proven track record of safe and effective wire and ribbon bonding worldwide.
DEEP ACCESS THERMOSONIC WIRE AND RIBBON BONDER
0.5 to 2.0 mil (12.7 to 50um) diameter wire and up to 1 x 10 mil (25.4 x 254um) ribbon
HYBOND Soft TouchJ energy system.
Front panel ultrasonic test button.
Deep vertical access of 0.59 in. (1,49cm).
Long horizontal reach of 3.5 in. (8,89cm).
0.5 inch and 2 inch spool mounts standard.
Loop height control adjustment.
Motorized vertical wire feed.
1-1-2; 1-2-2 and 1-2-1 stitch capability.
Swing away clamps for easier wire threading.
Deep access wire-in-tool 90° wire feed.
Variable angle microscope mount.
Audio and visual bond fault indicators.
Independent 1st and 2nd bond controls.
Front panel feed switch for manual tail adjust.
6 x 8.5 in. (15,24cm x 21,59) X-Y work platform.
LED display for monitoring temperature.
Independent lever for Z bond head control.
Wire and ribbon bonding capability.
Specifications for Model 572A:
Ultrasonic (U/S) System: PLL self tuning 62.5KHz (nominal) system (±2.5KHz).
U/S Power Range: 0-1 watt on low setting (default) and 0-2 watts on high setting.
Bond Time Range: 10mSec. to 400mSec.
Bond Force Range: 15gr. to 150gr.
Temperature Control Range: Ambient to 250 degrees Celsius.
Bondable Wire Diameters: 0.5 to 2.0mil (12,7 to 50µm) diameter.
Bondable Ribbon Dimensions: Up to 1 x 10mil (25,4 x 254µm).
Bondable Wire/Ribbon Materials: Gold, aluminum, platinum, copper, silver.
Bond Head Movement: Manual.
Bond Actuation: Switch at fixed height. Activated by lever.
Z Travel/Vertical Bonding Window: 0.5in. (12,7mm)/60-100mils (1,52-2,54 mm).
Table Motion: 4:1, manual manipulator standard.
Input Power Requirements: 110VAC 50/60Hz @ 10A max. or 240VAC with OP-12.
Minimum Bench Space Required: Width: 20in., Depth: 20in. (50,8 x 50,8cm).
Unit Weight/Shipping Weight: 55 lbs. (24,9Kg)/135 lbs. (61,4Kg). Shipping weight may vary.
Vacuum Requirement: Vacuum = 20 inHg minimum.
Industry Standards: CE.
The information referenced on this page is accurate to the best of our knowledge. We do not warrant the completeness or accuracy of the information contained herein. Interested parties are encouraged to request inspection to verify equipment condition, configuration, and completeness. Any offer to purchase equipment shall be subject to our standard terms and conditions of sale.
Get in touch
Ask about our equipment solutions, ranging from Macquarie equipment inventory sales, sourcing programs, surplus disposition options, and direct equipment purchases.